Magnescale LY71, Instruction And Installation Manual

Page: 63 / 104

LY71
(E)
2-3
2. Name and Function of Each Part
q e y u !1 !2 !3 !4 !5
!6
@0
@3
!0o i t r !7 @2 @1 !9 !8
w
2-1-2. When used with the comparator
No. Name Function
q
Judgment display Comparator judgment display (When NG, the NG lamp at the top
also lights on.)
w ABS lamp Lights on : When displaying absolute value (ABS)
Flashes : When selecting the axis
Lights off : When displaying incremental value (INC)
e
Counter display A : Measurement value display (current value, peak value)
r
Comparator setting B : Comparator setting value display Upper
value display C : Comparator setting value display Lower
t
Upper and Lower lamps Upper : Lights on when displaying maximum upper limit value,
flashes when editing
Lower : Lights on when displaying minimum lower limit value,
flashes when editing
y RESET key Resets incremental value to zero
Switches to INC mode when pressed during ABS display.
u
Axis Select key Used to perform operations for counter display A
i
Upper Limit Value Input key Used to edit the displayed numerical value
o CP No. key Used to change the comparator set number
(Comparator Number
Switching key)
!0
Lower Limit Value Input key Used to edit the displayed numerical value
!1
P key Used to perform numerical value setting operations (preset)
(lamp lights on when selected)
!2
key Used to set the datum point (lamp lights on when selected)
(Datum Point Value/ Used to set the master calibration value when using the master
Master Calibration Value calibration function
Setting key)
!3 REF key Used to detect the measuring unit reference point (lamp lights on
when selected)
Used to relocate the master calibration value when using the
master calibration function
!4
ABS/INC key Switches between ABS mode and INC mode
!5
SETUP key Used to start to make various settings