background image

このマニュアルに記載されている事柄の著作権は当社にあ

り、説明内容は機器購入者の使用を目的としています。

したがって、当社の許可なしに無断で複写したり、説明内

容 (操作、保守など) と異なる目的で本マニュアルを使用す

ることを禁止します。

The material contained in this manual consists of
information that is the property of Magnescale
Co., Ltd. and is intended solely for use by the
purchasers of the equipment described in this manual.
Magnescale Co., Ltd. expressly prohibits the
duplication of  any portion of this manual or the use
thereof for any purpose other than the operation or
maintenance of the equipment described in this
manual without the express written permission of
Magnescale Co., Ltd.

Le matériel contenu dans ce manuel consiste en
informations qui sont la propriété de Magnescale
Co., Ltd. et sont destinées exclusivement à l'usage
des acquéreurs de l'équipement décrit dans ce
manuel.
Magnescale Co., Ltd. interdit formellement la copie de
quelque partie que ce soit de ce manuel ou son emploi
pour tout autre but que des opérations ou entretiens
de l'équipement à moins d'une permission écrite de
Magnescale Co., Ltd.

Die in dieser Anleitung enthaltenen Informationen
sind Eigentum von Magnescale Co., Ltd. und sind
ausschließlich für den Gebrauch durch den Käufer der
in dieser Anleitung beschriebenen Ausrüstung
bestimmt.
Magnescale Co., Ltd. untersagt ausdrücklich die
Vervielfältigung jeglicher Teile dieser Anleitung oder
den Gebrauch derselben für irgendeinen anderen
Zweck als die Bedienung oder Wartung der in dieser
A n l e i t u n g   b e s c h r i e b e n e n   A u s r ü s t u n g   o h n e
ausdrückliche schriftliche Erlaubnis von Magnescale
Co., Ltd.

Summary of Contents for LY71













































Reviews: