background image

To prevent injury to the user or other people and property damage, the following  instructions must be
followed. Incorrect operation  may cause harm or damage. 

   Your air conditioner should be protected from

 moisture. e.g. condensation,  splashed water, etc. 

Do not place or store your air  conditioner where

 it can fall into water  or any other liquid. 

Unplug immediately.

 Always transport your air conditioner in a vertical 

   position and place on a stable, level surface

 during 

  

 use. 

   Turn off the product when not in use.
   Always contact a qualified person to carry out 

   repairs. If the supply cord is damaged it must be 

   repaired by a qualified repairer.
   Keep an air path of at least 12 in. all around the 

   unit  from walls, furniture and curtains.
   If the air conditioner is knocked over during use, 

   turn off the unit and unplug

  

 immediately.

   

    

   

SAFETY  PRECAUTIONS

!

Always do this

   Do not operate your air conditioner in a wet room

   such as a bathroom or laundry room.

   Do not touch the unit with wet or damp hands or 

   when barefoot.

   Do not press buttons with

  

 anything other than

 fingers.

   Do not remove any fixed covers. Do not use this 

   appliance if it is not working properly, or if it has

   been dropped or damaged.

   Never use the power plug to turn unit on or off.

   Do not cover or obstruct the inlet or outlet grilles.

   Do not use hazardous chemicals to clean or 

come   into contact with the unit.  Do not use in

 the   presence of inflammable substances or 

vapor such

  

 as alcohol, insecticides, gasoline, etc.

   Do not allow children to operate the unit 

   unsupervised.

   Do not use this product for functions other than

   those described in this instruction manual.

Never do this

Energy Save

Use the unit  in the recommended room size.
Place   

 the unit where nothing can obstruct the air flow.

Keep blinds/curtains closed during the sunniest part of the day.
Keep the filters clean.
Keep doors and windows closed to keep cool air in and warm air out.

The air conditioner must be operated within the  temperature range indicated below:

Operating conditions

Safety rules

Suggested tools for window kit installation

1. Screwdriver(medium size Phillips)            

2. Tape measure or ruler 

3. Knife or scissors

4. Saw(In case the window kit needs to be cut for the window to fit for direct installation)

  

MODE

ROOM TEMPERATURE

COOL

DRY

O

O

O

O

17 C(62 F)~35 C(95 F)

O

O

O

O

13 C(55 F)~35 C(95 F)

HEAT (heat pump type)

O

O

O

O

5 C(41 F)~30 C(88 F)

HEAT (electrical heat type)

O

O

<30 C/88 F

Note: Performance may be reduced outside of these operating temperatures.

2

Summary of Contents for P-14PE



















Reviews: