INSTALLATION INSTRUCTIONS
Exhaust hose installation:
The exhaust hose and adaptor must be attached or removed
in accordance with the usage mode.
The duct can be compressed or extended moderately
according to the installation requirement, but it is
desirable to keep the duct length to a minimum.
1. Install the window Exhaust adaptor B onto the exhaust
hose as shown in Fig.18. Refer to the previous
pages for window kit installation.
2. Place the Exhaust hose over against the air outlet opening
hook(See Fig.19) and flat the other end(See Fig.20) for
quick installation.
IMPORTANT:
DO NOT OVER BEND THE DUCT (SEE Fig.21)
Fig.18
Fig.21
Note:
Cover the hole using the adaptor cap when not in use.
COOL,HEAT(heat pump type)
or AUTO
mode
FAN, DEHUMIDIFY or
HEAT(electrical heat type)
mode
Attach
Remove
CAUTION:
Make sure that there is no obstacle around the air outlet of
the exhaust hose (in the range of 1.6 ft.) in order to the
exhaust system works properly.
12
Fig.20
Push in
Hook
Fig.19
