1
TROUBLE SHOOTING GUIDE
POWER
No Power
The AC/DC Adaptor had not
connect to the unit and AC
wall outlet
SYMPTOM
POSSIBLE CAUSE
POSSIBLE SOLUTION
Connect the AC/DC Adaptor to the
unit and AC wall outlet.
RADIO
No Sound
Noise or
sound
distorted on
radio mode
The unit is not in Radio mode
Press the
/SOURCE Button to
power on the unit. Press the /SOURCE
Button repeatedly until radio frequency
appears on the display.
ALARM
No alarm
Alarm had not activated
Set and activate the alarm(s) as page 12.
GENERAL SPECIFICATIONS
DC
DC
5 V, 1000 mA
3 V, 2 x AAA size batteries (Not included)
Power Source:
Clock Back-up:
Audio Power:
Impendence of speaker:
FM Frequency Range:
BT Version:
300 mW
8 Ohm, 0.5 W
87.5 - 108 MHz
4.2
ACCESSORIES
1 x Owner’s Manual
1 x AC/DC Adaptor (Input: AC 100 V - 240 V ~, 50/60 Hz, 0.3 A Max.;
Output DC 5 V, 1000 mA )
SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Station not tuned properly.
The location not good for
radio reception.
Retune the radio station.
Unwind and extended the FM wire
antenna on the rear of unit to its full
length and/or reassemble the other
direction/location to improve the
reception.
BT not
functioning
BLUETOOTH
The external BT device too
far from the unit.
Place the external BT device close to
the unit.
BT had not paired
Pair the external BT device to the unit as
page 11.
Volume level at minimum.
Increase Volume level.
