9
Connect the small plug from the supplied AC/DC Adaptor to the DC IN Jack on the
rear of unit. Connect the AC/DC Adaptor into any convenient household outlet has AC
100 - 240V~, 50/60Hz as illustrated below:
NOTE:
If the AC power
fails
, this electronic clock is designed to continue operating
internally (without showing the time on the Clock Display) with two (2) AAA size
batteries (not included). Install the batteries as follows:
Open the battery door on the bottom of unit by press the tab and then lift it.
Insert two (2) AAA size batteries (not included) according to the polarity
diagram inside the battery compartment. (Alkaline batteries are recommended.)
Replace the battery door.
BATTERY PRECAUTIONS:
Follow these precautions when using a battery in this device:
1.
Use only the size and type of battery specified.
2.
Be sure to follow the correct polarity when installing the batter as indicated in the
battery compartment. A reversed battery may cause damage to the device.
3.
Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old
batteries with fresh ones.
4.
If the batteries in the device are consumed or the device is not to be used for a long
period of time, remove the batteries to prevent damage or injury from possible battery
leakage.
5.
Do not try to recharge the battery not intended to be recharged; it can overheat and
rupture. (Follow battery manufacturer’s instructions)
6.
Do not dispose of battery in fire. Battery may explode or leak.
7.
Clean the battery contacts and also those of the device prior to battery installation.
POWER SOURCE:
To wall outlet
To DC IN Jack on
the rear of unit
