7
INTRODUCTION
(*) The unit can also be turned on by pressing these buttons.
1. Disc tray
• Place a disc after opening the disc tray.
2.
• Press to open or close the disc tray.
3. DISC IN indicator
• This indicator lights up in blue when a disc is in this unit.
4. Infrared sensor window
• Receive signals from your remote control so that you
can control the unit from a distance.
5.
• Press to stop playback.
6.
PLAY button*
• Press to start or resume playback.
7. PLAY indicator
• This indicator lights up in green when discs or SD
card play back.
8. STANDBY-ON indicator
• This indicator lights up in red when the power is in
the standby mode.
9.
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely turn off the unit, you
must unplug the AC power cord.)
• Press and hold for 10 seconds to shut down the unit.
10. SD card slot
• Insert an SD Memory Card and play back the
contents in it.
1. AC power cord
• Connect to a standard AC outlet to supply power to this unit.
• Unplug this cord from the AC outlet to completely
turn off the unit.
2. LAN terminal
• Use to connect a network equipment with LAN cable.
3. HDMI OUT jack
• Use to connect a TV with an HDMI compatible port
with an HDMI cable.
• Use to connect a TV, an AV receiver / amplifier or
other device with an audio cable.
• Use to connect a TV with component video inputs
with a component video cable.
• Use to connect an AV receiver / amplifier, Dolby
Digital / DTS decoder or other device with a digital
audio coaxial input jack with a digital audio cable.
• Use to connect a TV, an AV receiver or other device
with a video cable.
Front Panel
STOP
PLAY
STANDBY-ON
OPEN/
CLOSE
DISC IN
SD card
1
3 4
5
6* 7
2*
10
9
8
• This unit will be turned into the standby mode
automatically after 25 minutes of no action.
Rear Panel
L
Y
P
R
/C
R
P
B
/C
B
R
COAXIAL
COMPONENT
VIDEO OUT
AUDIO
OUT
VIDEO
OUT
DIGITAL OUT
PCM/BITSTREAM
HDMIOUT
LAN
5
4
3
2
1
7
6
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have the RF modulator.
INTRODUCTION
CONNECTIONS
PLAYBACK
FUNCTION SETUP
O
THER
S