Magnavox 19MDTR20 - Dvd-video Player, Service Manual

Page: 224 / 399

WF7
PIN 49
OF IC1401
PIN 32
OF IC1401
PIN 9
OF IC1401
WF8
WF4
WF2
PIN 10
OF IC1401
RF-SW
TP1402
WF1
CTL-AMP-OUT
TP1202
WF3
DVD-AUDIO-L
TP1001
WF19
ENV.
JM1403
WF6
1-11-16
Main CBA Bottom View < TV/VCR Section >
Because a hot chassis ground is present in the power
supply circuit, an isolation transformer must be used.
Also, in order to have the ability to increase the input
slowly,when troubleshooting this type power supply
circuit, a variable isolation transformer is required.
NOTE:
The voltage for parts in hot circuit is measured using
hot GND as a common terminal.
For continued protection against risk of fire,
replace only with same type 4 A, 125V fuse. CAUTION ! :
ATTENTION : Utiliser un fusible de rechange de m ê me type de 4A, 125V.
4A 125V
CAUTION !
Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit.
If Main Fuse (F1601) is blown , check to see that all components in the power supply
circuit are not defective before you connect the AC plug to the AC power supply.
Otherwise it may cause some components in the power supply circuit to fail.
BT1100F01012