MAGNATECH 609AF0A0C0, Operating And Maintenance Instruction Manual, Page: 4 / 50

1
1.0 INTRODUCTION
The Pipeliner Welding System is designed for mechanized welding applications using
the high-deposition GMAW/FCAW processes for efficient joining. Circular Guide Rings
allow use for pipe-to-pipe and pipe-to-fitting butt welding. Flx-Track allows linear welding
on flat or curved workpieces (ID and OD). A simple adaptor (optional) allows use for
socket and fillet welding applications. An optional pendular torch oscillator is
recommended for fillet applications, and welding pipe with wall thicknesses over 50mm
(2”).
The weld Head is designed to be used with the Pipeliner model 712 Controller, MPS
4000 Power Source and Water Circulator.
This Weld Head is available in three versions:
•
Floor mounted wire feeder
•
Hand mounted wire feeder
•
Push-pull system
This manual covers general operating instructions, as well as assistance in weld
procedure development.
The appropriate interconnect cables and accessories are provided.
When the equipment is first received we recommend that a quick inventory is taken of all
items using the packing list enclosed with the shipment.
ATTENTION:
ALL FASTENERS ON THESE WELD HEAD MODELS ARE METRIC
1.1 COPYRIGHT NOTICE
This manual and the information contained herein is the property of Magnatech
Limited Partnership. It is proprietary and shall not be copied in whole or in part
without the prior express written permission of Magnatech Limited Partnership.
Information and instructions in this document are subject to change and
Magnatech Limited Partnership reserves the right to change specifications and
data without notice.
This documents is based on the latest design version at the time of publication.
Some deviations in actual operation, from this document, are possible depending
on the production generation of a particular machine.
Edition publication date – April 2007. Copyright 2007 by Magnatech Limited
Partnership. All rights reserved.