MAGNATECH 609AF0A0C0, Operating And Maintenance Instruction Manual, Page: 20 / 50

17
TORCH PROPULSION MODULE
0-76cm/minute (0-30 IPM)
Clutch allows rapid repositioning of weld Head.
WATER-COOLED TORCH
300 amps at 100% duty cycle.
TORCH CABLE LENGTH
WFOF -4.6M (15’)
WFOH-1.5M (50’)
WFPP-8m (25’)
Extension cables available.
WELD HEAD DIMENSIONS/WEIGHT
Minimum
Axial Radial Overall
Length Clearance Width
Model
A
1
B
2
C
3
Weight
609 37.5cm 24.1cm 41.3cm 26.5 lbs
WFPP 14.75" 9.50” 16.25”
609 38.7cm 24.8cm 30.5cm 9.5 kg
WFOF 15.25” 9.75” 12” 21.5 lbs
609 66.7 cm 26.7cm 36.8cm 14.4 kg
WFOH 26.25” 10.5” 14.5” 31.75 lbs
1 Center of oscillation stroke
2 Center of vertical stroke
3 Weight without wire spool (WFOH). Includes 1.6 kg
(3.5) of Torch Cable Weight (Partial)
Guide Rings
Diameter Tolerance
: For a 2 segment Guide Ring, the tolerance is +/- 6mm or (+/-
0.25”) on pipe nominal diameter. (This corresponds to  3 mm =/- 0.125” tolerance per
joint X 2.) Each joint adds  3mm (0.125”) to the OD tolerance.
Joints per Diameter
:
Two joints: For Guide Rings up to 152 cm (60”)
Three Joints: For Guide Rings up to 231 cm (91”)
Four Joints: For Guide Rings up to 310 cm(122”)
Flx-Track
Minimum/maximum Radius: Workpiece ID/OD must be greater than
2.44 m (8’)