10
Y-6, Y-7, Y-8 Yoke
Operating Manual
English
9
English
Y-6, Y-7, Y-8 Yoke
Operating Manual
EU DECLARATION OF CONFORMITY
In accordance with EN ISO 17050-1:2010
Object of the declaration:
Product:
AC Yoke
Model/type:
Y-6, Y-8
Manufacturer:
Magnaflux
Address:
155 Harlem Avenue, Glenview, IL 60025, USA
This declaration is issued under the sole responsibility of the manufacturer.
The object of the declaration described above is in conformity with the relevant Union
harmonisation legislation:
2014/35/EU
The Low Voltage Directive
2014/30/EU
The Electromagnetic Compatibility Directive
2009/125/EC
Eco Design Directive
Conformity is shown by compliance with the applicable requirements of the following documents:
Reference & Date
Title
EN61010-
1:2010+A1:2019
Safety requirements for electrical equipment for measurement, control,
and laboratory use - Part 1: General requirements
IEC 61326-1:2020
Electrical equipment for measurement, control and laboratory use -
EMC requirements - Part 1: General requirements
EN ISO 9934-3:2015 Non-destructive testing – Magnetic particle testing – Part 3: Equipment
Signed for and
on behalf of:
Magnaflux
Place of issue:
DeWitt, Iowa, United States of America
Date of issue:
December 2020
Name:
Mike Fryauf
Position:
Engineering Manager
Signature:
UKCA DECLARATION OF CONFORMITY
In accordance with EN ISO 17050-1:2010
Object of the declaration:
Product:
AC Yoke
Model/type:
Y-6, Y-8
Manufacturer:
Magnaflux
Address:
155 Harlem Avenue, Glenview, IL 60025, USA
This declaration is issued under the sole responsibility of the manufacturer.
The object of the declaration described above is in conformity with the relevant Union
harmonisation legislation:
Electrical Equipment (Safety) Regulations 2016
Electromagnetic Compatibility Regulations 2016
2009/125/EC Eco Design Directive
Conformity is shown by compliance with the applicable requirements of the following documents:
Reference & Date
Title
EN61010-
1:2010+A1:2019
Safety requirements for electrical equipment for measurement, control,
and laboratory use - Part 1: General requirements
IEC 61326-1:2020
Electrical equipment for measurement, control and laboratory use -
EMC requirements - Part 1: General requirements
EN ISO 9934-3:2015 Non-destructive testing – Magnetic particle testing – Part 3: Equipment
Signed for and
on behalf of:
Magnaflux
Place of issue:
DeWitt, Iowa, United States of America
Date of issue:
April 2021
Name:
Mike Fryauf
Position:
Engineering Manager
Signature:
WARRANTY
Refer to the Magnaflux Warranty Statement at www.magnaflux.com.
SUPPORT
If you have a question please contact Magnaflux at:
1-847-657-5300
www.magnaflux.com
You can also contact your local Distributor or Magnaflux Authorized Service Center directly;
contact information is available at www.magnaflux.com.
