Index
Step 1: Component Installation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-3
Step 2: 10-Pin Main Harness Installation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-4
Step 3: 5-Pin Power Harness Installation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-5
Step 4: DIP Switch Programming
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
Step 5: Optional Accessory Connections
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-11
Step 6: Transmitter Programming
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12-13
Step 7: Remote Feature Programming
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14-15
Step 8: Multiple Car Programming
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16
Step 9: General Testing
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16
Step 10: Speciality Feature and Optional Equipment Testing
. . . . . . . . . . . . . . . . . . . . . . . .
16-19
Specifications
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19
Wiring Diagram
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20
Step 1: Component Installation
Mounting the Control Module:
Find a suitable location to secure the alarm control module within the passengers compartment of the
vehicle. Never mount the alarm control module in the engine compartment or in the trunk. In addition,
never mount the alarm control module in the direct path of the heater. Secure the alarm control module
by using wire ties or drill two 1/8” holes and secure the module to the frame of the vehicle with the
screws provided.
Mounting the Siren:
(Option on PLUS-5000 Packaging)
Find a suitable location in the engine compartment to secure the siren. Select a location that provides a
direct sound path to the ground for maximum siren output. Use the self tapping screws provided and
secure the siren. Connect the black wire coming from the siren to the frame of the vehicle. In many
cases, you can ground the black wire to one of the screws used to secure the siren. Run the remaining
brown wire through the fire wall to the location of the alarm control module.
Installing Hood/ Trunk Pin Switches:
Provided with the alarm kit is one pin switch and one mounting bracket. To install the switch either in the
truck or under the hood, find a suitable location where the switch will make contact with the hood or
trunk lid and will not get wet. Use the bracket provided or drill a 1/4” hole in the desired location.
2
Warning ! Do not plug the 10-pin or 5-pin wire harness into the alarm control module before you begin
installing the alarm. The wire harnesses must be plugged into the alarm control module after all
connections are made. Failure to follow this procedure could cause some confusion with transmitter
operation and or alarm function operation.
The PLUS-5000 security system ia packaged 3 different ways for maximum flexibility. Even though the
system is packaged 3 different ways they all contain the same module and installation harnesses. The
following is how each model number is packaged:
PLUS-5000: 5000 Alarm Module with no transmitters and no siren.
PLUS-5000S: 5000 Alarm Module with (2) standard 2-button transmitters and a siren.
PLUS-5000C: 5000 Alarm Module with (2) 4-button code-hopping transmitters and a siren.
