MagnaChip MC80F0104, User Manual, Page: 48 / 126

MC80F0104/0204 Preliminary
44 Mar. 2005 Ver 0.2
13. TIMER/EVENT COUNTER
TheMC80F0104/0204 has Four Timer/Counter registers.
Each module can generate an interrupt to indicate that an
event has occurred (i.e. timer match).
Timer 0 and Timer 1 are can be used either two 8-bit Tim-
er/Counter or one 16-bit Timer/Counter with combine
them. Also Timer 2 and Timer 3 are same. Timer 4 is 16-
bit Timer/Counter.
In the “timer” function, the register is increased every in-
ternal clock input. Thus, one can think of it as counting in-
ternal clock input. Since a least clock consists of 2 and
most clock consists of 2048 oscillator periods, the count
rate is 1/2 to 1/2048 of the oscillator frequency.
In the “counter” function, the register is increased in re-
sponse to a 0-to-1 (rising edge) transition at its correspond-
ing external input pin, EC0 or EC1.
In addition the “capture” function, the register is increased
in response external or internal clock sources same with
timer or counter function. When external clock edge input,
the count register is captured into Timer data register cor-
respondingly. When external clock edge input, the count
register is captured into capture data register CDRx.
Timer 0 and Timer 1 is shared with "PWM" function and
"Compare output" function. It has six operating modes: "8-
bit timer/counter", "16-bit timer/counter", "8-bit capture",
"16-bit capture", "8-bit compare output", and "10-bit
PWM" which are selected by bit in Timer mode register
TM0 and TM1 as shown in Table 13-1, Figure 13-1 .
Timer 2 and Timer 3 is shared with "PWM" function and
"Compare output" function. It has six operating modes: "8-
bit timer/counter", "16-bit timer/counter", "8-bit capture",
"16-bit capture", "8-bit compare output", and "10-bit
PWM" which are selected by bit in Timer mode register
TM2 and TM3 as shown in Table 13-2, Figure 13-2 .
Table 13-1 Operation Modes of Timer 0, 1
16BIT CAP0 CAP1 PWM1E
T0CK
[2:0]
T1CK
[1:0]
PWM1O TIMER 0 TIMER 1
0 0 0 0 XXX XX 0 8-bit Timer 8-bit Timer
0 0 1 0 111 XX 0 8-bit Event counter 8-bit Capture
0 1 0 0 XXX XX 1 8-bit Capture (internal clock) 8-bit Compare Output
0 X 0 1 XXX XX 1 8-bit Timer/Counter 10-bit PWM
1 0 0 0 XXX 11 0 16-bit Timer
1 0 0 0 111 11 0 16-bit Event counter
1 1 1 0 XXX 11 0 16-bit Capture (internal clock)
1. X means the value of “0” or “1” corresponds to user operation.
16BIT CAP2 CAP3 PWM3E
T2CK
[2:0]
T3CK
[1:0]
PWM3O TIMER 2 TIMER 3
0 0 0 0 XXX XX 0 8-bit Timer 8-bit Timer
0 0 1 0 111 XX 0 8-bit Event counter 8-bit Capture
0 1 0 0 XXX XX 1 8-bit Capture (internal clock) 8-bit Compare Output
0 X 0 1 XXX XX 1 8-bit Timer/Counter 10-bit PWM
1 0 0 0 XXX 11 0 16-bit Timer
1 0 0 0 111 11 0 16-bit Event counter
1 1 1 0 XXX 11 0 16-bit Capture (internal clock)
Table 13-2 Operating Modes of Timer 2, 3