EN
www.magmaweld.com
RS 350 M / RS 400 M / RS 500 M / RS 350 MW / RS 400 MW / RS 500 MW
11
USER MANUAL | MANUAL DO UTILIZADOR | KULLANIM KILAVUZU
TECHNICAL INFORMATION
1.1 General Information
Figure 1: Front View
Figure 2: Back View
1-
ON/OFF & Coarse Step Switch
2-
Fine Step Switch
3-
Gas Outlet Bush
4-
Wire Feeder Control Connector
5-
Welding Cable Socket (+)
6-
Voltmeter
7-
Ampermeter
8-
Earth Clamp Sockets (-)
9-
Torch Connector
10-
Wire Feeding Speed Adjustment Knob
11-
2/4 Function Selection Switch
12-
Handle
13-
Lifting Eye
14-
Turn Table
15-
Wheel
16-
Wire Feeder Harness
16-a
Welding Cable
16-b
Wire Feeder Control Cable
16-c
Gas Hose
17-
Gas Supply Inlet
18-
Fuses
19-
CO2 Heater Socket (220 VAC)
20-
Drum Feeding Wire Inlet
21-
Mains Cable
22-
Ventilator Grille
33-
Gas Cylinder Security Chain
1.2 Components Of RS 350 M / RS 400 M / RS 500 M
RS 350 M, RS 400 M, RS 500 M, RS 350 MW, RS 400 MW and RS 500 MW are 3 phase step controlled, Constant Voltage industrial MIG/MAG machines to
weld all types of solid and flux cored wires in any kind of fabrication and erection.
The welding voltage adjustment ranges are, for 350 model 21 steps between 20-51 V, for 400 models 28 steps between 16-34 V, for 500 models 30
steps between 16-39 V.
Wire feeding unit is a robust 4 wheel drive system which is designed as a separate box from the power source in order to cover larger work areas. It
contains a wire feeding motor-gearbox assembly, an electronic controlcard and a gas valve, therefore this unit should be handled carefully at site. The
wheels under the box are for the ease of the welder to move the box as he welds, but the box shouldn’t be pulled across the work area by the torch.
Even though you can manufacture with these machines in a big range of current scale all day long, model 350 is optimized for 1.0 mm, 400 for 1.2mm,
500 for 1.2-1.6 mm heavy-duty applications.
Technical Information
