11
www.magmaweld.com
USER MANUAL | MANUEL D’UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
RS 350 - 450 - 550 M / MW PRO
EN
TECHNICAL INFORMATION
1.1 General Information
1.2 Machine Components
Technical Information
RS 350 M / MW PRO, RS 450 M / MW PRO and RS 550 M / MW PRO are 3-phase, step-voltage controlled
MIG / MAG welding machines with horizontal characteristics, aimed for use in series production and construction
and which that can weld solid and cored wires. The welding voltage can be adjusted through the panel in front
of the machine and the wire feed speed can be set from the panel in front of the wire feeder. Welding voltage and
current can be monitored via digital display. The optimum welding parameters can be selected from the table
in the front panel in the wire feed unit. A 24 V electrical socket for the integrated gas tube platform and C0
2
gas
heater are available. It is cooled by the fan and has protection against overheating.
Figure 1 : RS 550 M PRO Front and Back View
1-
Wire Speed Welding Current Indicator
11-
Handle
2-
Torch Connector
12-
On/Off Switch
3-
Fine (Voltage) Adjustment Switch
13-
Ground Cable Socket (-)
4-
Coarse (Voltage) Setting Switch
14-
Wheel
5-
Welding Current Plug Socket WF Connection
15-
Gas Cylinder Fixing Chain
6-
Wire Feed Unit Connector
16-
CO
2
Heater Outlet
7-
Gas Outlet Connection
17-
Gas Inlet
8-
Set / Source Voltage Indicator
18-
Fan Outlet
9-
Adjustment Knob
19-
Gas Cylinder Transport Platform
10-
Rotating Apparatus
1
8
9
10
11
15
16
17
18
19
12
2
3
4
5
6
7
14
