19
www.magmaweld.com
USER MANUAL | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
EN
monoTIG 160i / monoTIG 200i
3.2 TIG Cycle
3.3 Menu Structure
The statuses of the functions on or off according to the modes are as follows.
• 10 jobs programs including complete parameter settings can be stored and run for repeated jobs.
• In the first use, all parameters of all programs are in factory settings which are shown in the table.
• Push the program selection button. For selecting a previously adjusted program or changing its parameters.
• Push the welding mode selection button for selecting Touch-Lift TIG of HF start TIG.
• Push the 2 Stroke - 4 Stroke - Spot Welding Selection Button for selecting the appropriate mode for the work.
• Latest adjusted parameter values will be saved automatically. There is no need to do anything else for saving the
settings.
Main Current
5-200 A
80 A
19
Post-Gas Flow Time
0-20 sec
2 sec
25
Down-Slope Time
0-10 sec
1 sec
23
Parameter
Range
MMA Welding
Factory Setting
2 Stroke TIG 4 Stroke TIG
Spot TIG
DC
DC
DC
LED
3.3.1 TIG Welding Process
In HF Start TIG mode, a high ignition voltage is present at the torch. Never touch the tungsten
electrode or parts conducting welding current when the device is switched on.
Electrode
Diameter
“mm”
Recommended
TIG Welding
Current “A”
1.6
2.0
2.4
30-130
45-180
70-240
Main Current
Down-Slope
Time
Post-Gas
Flow Time
Operation
