Monostick 180i
EN
www.magmaweld.com
10
USER MANUAL | MANUAL DO UTILIZADOR | KULLANIM KILAVUZU
Technical Information
TECHNICAL INFORMATION
1.1 General Information
Figure 1: Monostick 180i
1-
Power Switch
5-
Earth Cable and Welding Cable (+)
2-
Digital Display
6-
Line Cable Inlet
3-
Current Adjustment Knob
7-
Handle
4-
Earth Cable and Welding Cable (-)
1.2 Machine Components
Monostick 180i is an inverter type portable, mono-phase DC MMA welding machine designed to weld stick electrodes up to 4 mm. This unit can also
be used as a DC TIG power source for touch-start applications. Even though the machine is mono-phase, due to the inverter technology it provides
stable arc and good restriking performance, also the electric consumption is approximately %10 less than the silicon controlled rectifier equipments
and %25 less than the magnetically controlled equipments.
Monostick 180i proved well that it can work between 185 to 250 V 50/60 Hz line voltages. Therefore this machine is quite immune to mains voltage
fluctuations and perfectly welds with generator-sets. Monostick 180i can also be used with long welding cables up to 25 mt. The machine is fan
cooled and thermally protected against over heating.
