EN
22
www.magmaweld.com
USER MANUAL | MANUEL D’UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
ID 400 MK PULSE EXPERT / ID 400 MKW PULSE EXPERT
Pulse (Pulse MIG/MAG)
When the
Pulse
welding method is selected in the
METHOD
menu, the modes will be as follows:
The machine determines how long the water in the system should circulate in the torch after the machine
has cut off the welding process.
As soon as the machine starts welding, the water circulation will start and after the welding is completed, the
water-cooling unit LED will remain on during the time set in the menu.
Setting Range
• 1-5 min.
d) COOLING TIME
When the D.Pulse option is selected, the D.Pulse parameters on pages 6 and 7 of the menu must be set.
With double pulse structure, welding process is done without deformation in the material especially in
root pass process. Double pulse provides more aesthetic welding seams.
CLASSIC MODE
The classic mode will not be
active in the pulse method. When
the Pulse method is selected, you
cannot see any value in the classic
mode. This is because in the
Pulse method, all the settings
come from the software base of
the machine and the user is not
allowed to make any adjustments.
SMART MODE
When selected, welding
parameters such as wire type,
wire diameter, gas type must be
selected correctly. The machine
will automatically adjust the
optimum voltage according to
the selected welding current.
You can adjust the voltage by
turning the adjustment knob in
the +/- direction within a certain
tolerance range.
SYNERGIC MODE
Welding parameters such as wire
type, wire diameter, gas type and
thickness must be selected
correctly. Both the current and
the voltage will be automatically
adjusted according to the selected
welding parameters. The user can
navigate both in the current and
voltage within a certain tolerance
range. The machine will
automatically recalculate the
voltage according to the current
value set at the specified
tolerance.
D.Pulse (Double Pulse)
When the
D. Pulse (Double Pulse)
welding method is selected in the
METHOD
menu, the modes will be
as follows:
CLASSIC MODE
The classic mode is not active in
the Double Pulse method. When
the Double Pulse method is
selected, you cannot see any value
in the classic mode. This is
because in the Double Pulse
method, all the settings come
from the software base of the
machine and the user is not
allowed to make any adjustments
SYNERGIC MODE
Welding parameters such as wire
type, wire diameter, gas type and
thickness must be selected
correctly. Both the current and
the voltage will be automatically
adjusted according to the selected
welding parameters. The user can
navigate both in the current and
voltage within a certain tolerance
range. The machine will
automatically recalculate the
voltage according to the current
value set at the specified
tolerance.
SMART MODE
When selected, welding
parameters such as wire type,
wire diameter, gas type must be
selected correctly. The machine
will automatically adjust the
optimum voltage according to
the selected welding current.
You can adjust the voltage by
turning the adjustment knob in
the +/- direction within a certain
tolerance range.
Operation
Summary of Contents for ID 400 MK PULSE EXPERT
Page 177: ......
