Magio MG-441, Instruction Manual

Page: 39 / 42

39
EN
The induction cooker
keeps sending out the Bi
sounds
• Make sure the pot used is compatible
• Check whether the pot is placed in the
center of the plate or not.
• Check whether the diameter of the pot is
bigger than 10 cm or not.
Warning «E0» on screen
• Make sure there is a pot.
• Check if unusable cooking cookware.
Warning «E1» on screen • Check if the voltage is too low.
• Check whether the socket is loose.
Warning «E2» on screen
• Check if the voltage is too high.
Warning «E3» on screen • Check if the pot has no water in it. Add
liquid to the pot.
Warning «E4» on screen
• Check if the thermostat is broken.
Suddenly stop heating
during cooking, warning
«E5» on screen
• Check whether the environment
temperature is too high or not.
• Is the air inlet or air outlet of the induction
cooker blocked?
• Make sure the fan is working or not.
• Check whether the keep warm
temperature is already reached the
temperature set or not.
• Check if the fan is still working or not, it
maybe the adjustment of the unit itself,
try it again after 10 minutes.
Warning «E6» on screen • Check if the radiator is broken or not.
Cleaning and maintenance
1. Before cleaning, unplug the product from the mains, wait until it cools
to room temperature.
2. D o not use sharp objects, abrasive and chemical cleaners. Be sure
to remove any dirt from the ventilation openings
3. Wipe the case and work surface with a damp cloth. Do not immerse
the product and the power cord in water or any other liquid.
»
The work surface must be cleaned of dirt after each use.
Note: