Magio MG-441, Instruction Manual, Page: 33 / 42

33
EN
• Keep the power cord away from sharp edges and hot surfaces.
• The appliance must not be left unattended when connected to power.
• Avoid touching the metal parts as they become very hot.
• Avoid the water spilling or any other liquid on the device, power cord
and plug.
• If the appliance falls into water, unplug it immediately. In this case, do
not put your hands in the water. Before further use, the appliance must
be checked by a qualified specialist.
• Do not use the device near heat sources or open flames.
• Do not immerse the device in water or any other liquids.
• The device is not intended for operation with an external timer or a
separate remote control system.
• Always place the appliance on a flat, dry and stable surface.
• Install the induction plate on a horizontal surface, at a distance of at
least 10 cm from the wall and other objects. This will promote good
ventilation.
• Do not use the appliance on a metal table.
• Do not move the plate during cooking.
• Do not place magnetized objects, such as credit cards, etc., on the
plate during its operation.
• Do not heat closed cans on the plate. They can explode.
• To avoid affecting product performance and to prevent injury, do not
heat empty pots.
• Never place flammable surfaces (such as tablecloths or carpets) on
the appliance. Do not use flammable substances, acids or alkalis near
the appliance. This may cause a fire.
D o not use glass, ceramic or aluminum utensils for cooking.
Utensils should be at least 10 cm in diameter and 2 to 6 mm thick
at the bottom.
Persons with pacemakers should be at a distance of at least 60
cm from the induction plate during operation.
T o avoid burns, do not touch the work surface during and
immediately after cooking. During operation of the product, the
work surface is not heated, but it is heated by hot dishes.
• Unplug the appliance from the mains when you do not use or before
its cleaning. When unplugging the appliance, do not pull on the power
cord but pull directly on the plug.
• Switch off the appliance and unplug it from the mains before changing
accessories.
• Always unplug the appliance when unattended and before assembling,
disassembling or cleaning.
»
The fan keeps spinning after end-use to dissipate the heat. Only
when the fan stops spinning, you can unplug the power cord.
Note: