![background image](http://html.mh-extra.com/html/maginon/qc-50s/qc-50s_instruction-manual_691015024.webp)
Using the quadrocopter
24
− To avoid damaging a memory card, turn
off the quadrocopter before inserting or
removing the memory card.
− MicroSD/SDHC memory cards up to a capacity
of 32 GB are supported.
Using the quadrocopter
Before you fly with the quadrocopter, first read this manual
to learn about its control functions and then perform some
exercises.
Place the quadrocopter on a flat surface. The back of the
quadrocopter (red position LEDs
32
) must be facing you. First
practice controlling the hovering flight with the left control
stick
24
. Then try to change the position of the quadrocopter
with the direction control stick
16
(forward, back, sideways)
and catch it if necessary.
Finally, you should practice turning the quadrocopter around
its own axis with the left control stick
24
. Once you have
mastered the basic functions of the quadrocopter, you can
perform your first controlled flight.
Switching on and off
To switch on, use the On/Off switch
33
on the side of the
quadrocopter
1
. All LEDs on the quadrocopter will start
blinking. When the remote control is switched on, the LEDs
blink slower.
Place the quadrocopter on a level surface with the tail facing
you to ensure that the gyroscope is centered. Now turn on the
remote control
2
by pressing the On/Off switch
20
on the
remote control
2
. The power LED of the remote control
2
blinks constantly red as soon as it is switched on. An audible
signal will also sound. The connection to the quadrocopter