Preparing the quadrocopter
23
Mounting the camera
To mount the supplied camera
7
, slide it onto the rail on the
bottom of the quadrocopter
1
until the camera locks into
place. Connect the camera by plugging the camera connector
into the camera connector
34
of the quadrocopter
1
.
Inserting the memory card
A memory card must have been inserted in order to save
photos and videos. Before turning on the quadrocopter
1
insert a micro SD / SDHC memory card into the camera's
memory card slot
7
.
− Insert the memory card as shown in the figure below. Press the
memory card into the memory card compartment until it clicks
into place.
− To remove memory card push card in again until it is partly
ejected.