Using the quadrocopter
25
has been established. Press the left control stick
24
(pitch/
yaw) to the highest position and then back to the lowest
position. An audible signal will sound in each case. Coupling
the remote control to the quadrocopter is complete as soon
as all LEDs on the quadrocopter light up. Do not move the
quadrocopter
1
while it connects to the remote control
2
.
After flying, turn off the remote control
2
with the On/Off
switch
20
and the power LED goes out. Then press the On/
Off switch
33
on the side of the quadrocopter
1
to turn it off,
the LED lights go out.
If you do not intend to use the remote control
for an extended period of time after switching it
off, remove the batteries to prevent them from
leaking.
Take-off and landing
(One key Take Off)
Press the Start/Landing button
11
to start the quadrocopter
rotors. Press the left control stick
24
upwards to bring
the quadrocopter to a certain height. This height is then
maintained.
Press the Start/Landing button
11
again to gently land
the quadrocopter. While you are landing, you can use the
direction control sticks
16
to determine the direction so that
you land in the right place. The rotors switch off automatically
after ground contact.