![background image](http://html1.mh-extra.com/html/maginon/ipc-1a/ipc-1a_instruction-manual_3543436015.webp)
13
5.3. Hardware installation
Using an existing router, the WiFi Network Camera is integrated in an existing computer
network. A router is generally a device connecting your computer or a local network to the
Internet.
To carry out these basic settings on the WiFi Network Camera, the camera must first be
connected directly to the router using the supplied network cable.
Two control LEDs are positioned above the LAN connection of the WiFi Network Camera.
yellow: indicates that network activity is taking place.
green: indicates that the WiFi Network Camera is connected to a network.
Note:
t
If your router does not have a connection for a network cable, the surveillance
camera can also be set up without a router.
In this case deactivate all existing networks on the computer and plug the network
cable of the WiFi Network Camera directly into the computer. Using the
supra IPCam
Config
(see section 5.4) you will then also be able to access the camera.