17
AFTER SALES SUPPORT
AUS
1800 623 432
MODEL: DV-300
PRODUCT CODE: 43081
09/2014
7.4. Use as webcam
To use the camera as a webcam, install the
webcam driver from the supplied software CD.
Connect the video camera to the computer as
described in section 7.2 and switch on the
camera. Press the SETUP button on the camera
to change to the Webcam mode from the
“MSDC” mode. After installing the driver, the
folder “SPCA1682 PC Driver” appears on your
computer under “All Programs”:
Open the program “Amcap” in the folder to
display the webcam image of the video camera.
The image can, however, also be viewed using
any other program with webcam function.
7.5. Connection to a TV
You can transfer the monitor image from the video camera to a TV. Connect the device through
the AV cable with an AV connection from the
TV. Then select the AV connection used on
the TV as the input.
If your TV contains a HDMI port you can also
connect the camera to the computer using a
suitable HDMI cable (not supplied). This will
produce a higher quality connection than an
AV cable.