12
AFTER SALES SUPPORT
AUS
1800 623 432
MODEL: DV-300
PRODUCT CODE: 43081
09/2014
5.4. System settings
In order to change system settings for the video camera , first open the menu in any mode with
the
MENU
button. Then with the
SETUP
button, move into the system menu.
The following settings are available in the system menu:
Sound:
Shutter
Determine if an audio signal should be emitted when taking a photo.
Start up
Determine which tone should be played when turning on the
video camera.
Beep
Determine if an audio signal should be emitted when pressing a
button.
Volume
Set the volume for the audio signals.
Auto Review:
Off
No automatic preview by photos.
1s
By photos, the recorded picture is displayed for 1 second.
3s
By photos, the recorded picture is displayed for 3 seconds.
Power frequency:
Set the mains frequency corresponding with the mains frequency of your local mains to 50 or 60
Hz. This hinders flickering for recordings with artificial light.
Power save:
Set the automatic shutdown time to 1 min, 3 min, 5 min. The camera will switch off
automatically after the selected time if no button is pressed. Select
OFF
to disable the
automatic shutdown.
Date & Time:
Set the date and time. Use the
LEFT
and
RIGHT
buttons to change to the value to be modified
and change this value with the
UP
and
DOWN
buttons. Confirm your setting with the
OK
button.