AFTER SALES SUPPORT
AUS
1 800 623 432
AUS
74
Settings
1.
Infrared LEDs, use in dark conditions:
If this option has
been activated, Infrared LEDs are activated as additional
light sources in dark conditions.
2.
Fixed position during switch on:
Activate this option
if the camera head security camera is to assume a pre-
specified position when the security camera is switched
on.
3.
Position during switch:
Specify the position to be
assumed by the camera head when switched on. Using
the control buttons on the security camera, select the
centre for centering the camera head or select one of the
positions to be stored in the camera view (see section
“Save positions“).
4.
Manual speed
Specify the speed with which the camera
head should move in case of manual control The higher
the value, the slower the speed of the camera head
5.
Automatic speeds:
Specify the speed with which the
camera head should move in case of automatic control,
separately for top, bottom left and right. The higher the
value, the slower the speed of the camera head
Click on “Apply“, to accept the changed settings. Changes to
the head settings are stored without having to restart the
security camera.
Resetting the IP security camera
Click on “reset now” to reset the IP security camera to the
default settings.
Resetting takes 1 minutes. Wait until the Browser window
shows the logging on option again.
