AFTER SALES SUPPORT
AUS
1 800 623 432
47
AUS
Start
6. Deactivate “DHCP“ and enter under “Static configuration“:
• IP address: 169.254.10.100; Subnet mask: 255.255.0.0
• “Standard gateway“ and “DNS Server“ remain empty
7. Click on “Apply” and wait until the program shows the IP
security camera.
The wireless connection between the IP security
camera and the router is not working.
1. Check the wireless settings and in particular the entered
code. All WLAN channels may not be enabled. Adjust the
“Region” setting when entering the Wireless settings.
2. You router may allocate changing local IP addresses each
time it connects. Search for the IP security camera again
using
supra IPCam Config.
