AFTER SALES SUPPORT
AUS
1 800 623 432
AUS
64
Settings
When “Uncoded“ is selected, data are not encoded prior to
transmission. When using“WEP“, “WPA“ or “WPA2“ encoding,
additional encoding information must be provided. Enter the
same settings as shown for the router or access point.
− Enter wireless network settings without
changing. This is the only way to ensure the
correct connection of the IP security camera.
− Also, general settings of the router or access
points should not be changed where this
is not required. Otherwise this could result
in problems with other WLAN devices in the
network.
Use the “Search“ function to start an automatic search of
existing wireless networks. Select the desired WLAN network
from the list by marking it under “Selection” and click on
“Use“. Where encoding data is required for the selected
network, these must still be entered.
Click on “Apply“, to accept the changed settings. Next, restart
the IP security camera to accept the changes. The restart
takes about 2 minutes.
