background image

INTRODUCTION

This manual contains all information required for the intended use of the equipment. 
Deviation from the described intended use can result in a hazardous situation and/or 
property damage.

This manual includes notes and warnings on safe operation of the equipment. These 
notes and warnings are accompanied by the following icons. Read them attentively!

DANGER

Indicates a hazardous situation that, if not avoided, will result in 

death or serious injury. This signal word is to be limited to the most 

extreme situations.

WARNING

Indicates a hazardous situation that, if not avoided, could result 

in death or serious injury.

CAUTION

Indicates a hazardous situation that, if not avoided, could result 

in minor or moderate injury.

NOTICE

Indicates information considered important, but not hazard-

related (e.g. messages relating to property damage).

LANGUAGE

This document contains the original instructions in English. In case you require other 
languages please contact MAGIC FX.

REVISION TABLE

Doc nr

Revision Date

Description 

Author Approved

PART02472

01-00

04-09-2023 Initial release

MBO

PvdW

4  MAGICFX

®

 ECO2JET 

 

User and Installation Manual

Summary of Contents for CO2 Dominator





















Reviews: