background image

18  MAGICFX

®

 ECO2JET 

 

User and Installation Manual

MAINTENANCE

To achieve the maximum service life of the CO2 SWITCH you must regularly clean the 
CO2 SWITCH and test if it is functioning correctly.

Contact MAGIC FX if the CO2 SWITCH is not functioning correctly.

DANGER

Do not replace parts yourself; always consult MAGIC FX. 

TROUBLESHOOTING

Always contact MAGIC FX if any malfunctions or errors occur that cannot be solved 
with the instructions as described in this manual.

CORRECT DISPOSAL

This symbol on the product and / or accompanying documents 
means that used electrical and electronic products should not be 
mixed with general household waste. For proper treatment, 
recovery and recycling, please take this product to designated 
collection points where it will be accepted free of charge.

Alternatively, in some countries you may be able to return your 
products to your local retailer upon purchase of an equivalent new 
product.

Disposing of this product correctly will help save valuable resources and prevent any 

potential negative effects on human health and the environment, which could 

otherwise arise from inappropriate waste handling.

Please contact your local authority for further details of your nearest designated 
collection point.

Penalties may be applicable for incorrect disposal of this waste, in accordance with 
your national legislation.

Summary of Contents for CO2 Dominator





















Reviews: