12 MAGICFX
®
ECO2JET
—
User and Installation Manual
3
Tighten the starknob to secure the CO2 SWITCH.
3.2
CONNECT POWER
1
Connect the PowerCon TRUE1 power cable to the power input of the CO2
SWITCH. Connect the other end to the power controller with a 100-250 Vac (50-60
Hz) power output source.
CAUTION
Do not connect more units to a single electrical circuit than the
installed fuse is able to handle. (Calculate the summed load with
the electrical data from Chapter 1)
2
Switch the power on and check if the LED power indicator lights up. Check if
you hear a clicking sound. If so, then the machine is working correctly.
CAUTION
Make sure that the CO
2
is not connected when testing the power.
3
Switch off the power.
