28
P160 User Manual
Valid
Invalid
Note: The Time Schedule cannot be set across two days, which means that the end time must
be greater than the start time.
Holidays
The holiday access control time can be set, which is applicable for all users during holiday. Enter
into “Access Control”
”Holidays”, press “Add Holiday” and enter into the interface .
Settings include number, start time, end time and time period.
Note: Start/End Date only requires to set the
month (MM) and date (DD), which is applicable
to all years.
Time period: the valid time Schedule used in
the holiday.
As shown in above figure: Holiday 1 starts on the May 1 every year, ends on the May 3 every year
Access Groups
Grouping is to manage users in groups.
Group users' default time zone is set to be the group time zone, while users can set their personal
time zone. Each group can set 3 time zones at most, as long as one of them is valid, the group
can be verified successfully.
By default, the new enrolled user belongs to Access Group 1, and can also be allocated to other
access group. Enter into “Access Control”
”Access Groups”
”New Group”.
