19
USE INSTRUCTIONS
Warning: When not using the machine, keep the
Handles
(1) in the
STORAGE
position. Do not close
completely in order to avoid damaging the
Airtight Gasket
(7).
Before each use, carefully clean your machine and accessories that come in contact with
food (canisters, lids, jars, etc....) following the instructions provided in paragraph
“CLEANING
INSTRUCTIONS”.
1 - Positioning the machine
Position the machine in a dry place on a horizontal surface, being careful to leave the work zone
around the machine itself free of obstacles and wide enough to allow for placing the bags of food
to be packaged. Connect the power cable to an electrical outlet corresponding with its voltage
(see the information label).
2 - Connecting the machine
Insert the
Power Cable
Plug (17) in the outlet. Check for correct connection by rotating
the
Handles
(1) in the
START
position; on the
Display
of the
Mod. P0608ED
, the
GREEN
ON LED
(2a), the
BLUE LED
(20) for the
“normal”
pump speed and the
RED LED
(2L) for the
“humid“
sealing mode will light up.
3 - Adjustments
Adjustments to the
Mod. P0608ED
must be selected each time a packing cycle is started. These, in
fact, reset the
Handles
(1), rotating them to the
OPEN
position.
3.1 - Setting the sealing mode
The
Mod. P0608ED
is equipped with an intelligent sealing function that auto-adjusts the sealing
according to the temperature of the
Sealing Bar
which increases little by little with consecutive
packing cycles. Therefore, the final bag sealing result can be influenced by the type of food to be
packed or the temperature of the room.
Thus, to optimise the final result you can choose form 2 sealing modes:
• “dry”
for dry foods like cookies, rice, coffee, cheeses, dry meats and salami
• “humid”
for red meats, which have liquids or blood, and fish
When the machine is turned on, the sealing option is always set to
“humid”.
To set the sealing mode, before starting the packing
cycle, press the
“sealing mode”
button (2M) to
select the mode desired (fig. A).
ATTENTION:
The sealing mode selected remains
memorized until the
Handles
(1) are rotated to the
OPEN
position. The selection must be done at every
packing cycle.
Summary of Contents for P0608ED
Page 2: ......
