8
Magic TV™ Settings
61
60
8.1
Info Format
Auto Info Banner
Normal *
Slow
Off
When the channel is changed, or Live TV is first accessed, the ‘Info Banner’
will show. This setting allows you to choose the time taken before it disappears.
Front Panel Brightness
Normal *
Dim
From here, you can select a reduced brightness setting for the front panel.
Front Panel Clock
AM/PM *
24-hour
Off
Normally, when Magic TV™ is in ‘Standby’, the front panel will display the
current time in 12-hour AM/PM format. This menu allows you to change the
display to a 24-hour clock, or turn it off.
OSD Transparency
Solid
Low *
Medium
High
When the Magic TV™ menus overlay a TV programme, they are transparent
so that you can still see the moving image below.
The level of transparency can be set here.
Adjust OSD Size
Normal*, -1%, -2%, -3%, -4% and 5%
If your TV overscans the image from Magic TV™ so that the menus spill
off the edge of the screen, you can shrink the On-Screen Display (OSD)
by -1% to -5% here.
USB Storage Message
Off
On *
When Magic TV™ is initially turned on, it will display a message telling you if
you have a USB device attached and if it is suitable for recording. If you want
to remove this message, set this option to ‘Off’.
Recording OSD Logo
Off
On *
During recording, Magic TV™ will display a
logo for 3 seconds
at 10 second intervals. This setting allows you to turn the logo off.
8
Magic TV™ Settings
* = default setting
Playback OSD Logo
Off
On *
During playback of recorded programmes, Magic TV™ will display
a
logo for 3 seconds at 10 second intervals. This setting allows you
to turn the logo off.
Timeshift OSD Logo
Off
On *
During Live Pause and Instant Rewind, Magic TV™ will display a
logo for
3 seconds at 10 second intervals. This setting allows you to turn the logo off.
Exporting OSD Logo
Off
On *
During the process of moving or copying a recorded programme onto another
Hard Disk Drive (HDD), Magic TV™ will display a
logo for 3 seconds at
10 second intervals. This setting allows you to turn the logo off.
Magic TV™ functions are limited during the export process.
See
section 6.8
for further details.
8.2
Video
Video Output Format
50/60Hz
. As New Zealand DTT programmes will normally be
broadcast in 50Hz, selection of a 50Hz format from the list below is
recommended. However, some TVs (perhaps from Japan or America where
broadcasts are in 60Hz) may not happily accept a 50Hz signal. In this case
choose from the list of 60Hz formats provided.
1080i (50Hz) *
The default setting – accepted by all HDTVs
1080p (50Hz)
A good choice if your TV accepts a 1080p HDMI
input
720p (50Hz)
A good choice if your ‘HD Ready’ TV has 720 or
768 lines of resolution
576i (50Hz)
Use only if your TV is Standard Definition
576p (50Hz)
1080i (60Hz)
1080p (60Hz)
720p (60Hz)
480i (60Hz)
480p (60Hz)
Standard Definition analogue outputs will output PAL if a 50Hz setting has
been chosen and NTSC if a 60Hz output has been chosen.
To ensure that you can always see a picture, Magic TV™ will automatically
revert back to the previous format after 15 seconds if you haven’t responded
to the on-screen prompt.
* = default setting