Maggi 16271400, Use And Maintenance Manual, Page: 6 / 62

1) SAFETY AND GENERAL INFORMATION …………………….……………......………
1.1 ) RECOMMENDATIONS FOR USE AND MAINTENANCE…………………....………...
1.2 ) MACHINE IDENTIFICATION……………….................…………………………………..
2 ) OPERATION NOTES ……………………………………………………………………….
3 ) MACHINE DESCRIPTION...............……………………………………………………….
3.1 ) APPLICABLE TOOLS....…………………………………………………………………….
4 ) EQUIPMENT ………………………………………………………………………………...
5) SAFETY DEVICES AND WARNING SIGNS ……………………………………………..
6 ) PERSONAL PROTECTIVE EQUIPMENT AND RESIDUAL RISKS ……………….….
7 ) TECHNICAL DETAILS ……………………………………………….……………………..
8) INTENDED USE ……………………………………………………………………………..
8.1 ) MATERIALS ..………………………………………………………………………………..
8.2 ) IMPROPER USE..……………………………………………………………………………
9 ) TRASPORT .. ………………………………………………………………………………..
10 ) INSTALLATION....…………………………………………………………………………..
10.1) MACHINE LOCATION.........................…………………………………………………….
10.2) LEVELLING........……………………………………………………………………………..
11 ) OPERATING AREA...………………………………………………………………………..
12 ) MACHINE INSTALLATION AND CHECK PROCEDURE............................................
13 ) MACHINE INSTALL. AND PRELIMINARY CHECKS PRIOR TO COMMISSIONING ………….
14 ) MACHINE HOOK-UP TO THE EXTERNAL POWER SOURCES.....................………
14.1) MACHINE HOOK-UP TO THE EXTERNAL POWER SOURCES.....................………
14.2) PNEUMATIC CONNECTION……………………………………………………………….
14.3) MACHINE START-UP.....................………………………………………………………..
14.4) WORK CYCLE........ ………………………………………………………………………...
14.5) CONTROL PANEL................... …………………………………………………………….
15 ) CHECKS AND ADJUSTMENTS………..…………………………………………………
15.1) INSULATION PROCEDURE.......…………………………………………………………..
15.2) PREVENTIVE INSPECTIONS ………………………………………………….…………
15.3) DRILLING DEPTH AND SPINDLE HEAD ADJUSTMENT …………………………….
15.4) HORIZONTAL AND VERTICAL POSITIONING OF THE SPINDLE HOLDER HEAD …...
15.5) 0°- 90° DRILLING USING THE REFERENCE STOP..................................…………..
15.6) USE OF THE LONG FENCE 1.5 + 1.5 mt STANDARD...……………………………….
15.7) USE OF THE REFERENCE PIN
( OPTIONAL ) …………..............……………...
…………………..
15.8) USE OF THE TRIANGLE FOR 45° CORNERS
( OPTIONAL ) …….
………………………..
15.9) USE OF THE CENTRAL BATTEN
( OPTIONAL ) ......………………………………………………………...
16 ) EXAMPLES OF WOODWORKING ………………………………………………………
17 ) MAINTENANCE..…………………………………………………………………………….
17.1) ROUTINE MAINTENANCE.......…………………………………………………………….
17.2) MACHINE CLEANING..........……………………………………………………………….
17.3) SLIDES CLEANING......……………………………………………………………………..
17.4) VERIFICATIONS ELECTRIC CABLES …………………………………………………..
17.5) EXTRAORDINARY MAINTENANCE…………………………………………………….
18 ) COMMON FAILURES - REASONS AND REMEDIES………………………………….
18.1) DRILLS DO NOT WORKS………………………………………………………………….
18.2) THE MOTOR WORKS BUT NOT THE DRILLS …………………………………………
18.3) THE DRILL IS NOT ACCURATE…………………………………………………………..
19 ) FAULTS DURING NORMAL WORK CYCLE ……………….……………………………
19.1) THE BITS LEAVE SIGNS OF BURNING………………………………………………….
19.2) THE DRILLED PIECES ARE NOT PARALLEL WITH THE STOP……………………..
19.3) THE HEAD CANNOT ROTATE PROPERLY…………………………………………….
19.4)
THE WORKING PIECE IS NOT BLOCKED BY THE SAFETY CLAMP
………………………
20 ) NOISE…………………………………………………………..............…………………….
21 ) DUST EMISSION............……………………………………………………………………
22 ) MACHINE DECOMMISSIONING.......................………………………………………….
23 ) WIRING DIAGRAM.....………………………………………………………………………
24 ) GUARANTEE…………………..…………………………………………………………….
25 ) SPARE PARTS..............................………………………………………………………...
26 ) SPARE PARTS REQUEST..........………………………………………………………….
1
1
1
2
2
2
3
3
5
6
6
6
6
7
7
7
7
8
8
11
12
12
12
12
13
13
13
13
13
14
17
17
18
20
20
21
21
25
25
25
25
25
25
27
27
27
27
27
27
27
27
27
27
28
28
28
28
30
53
TABLE OF CONTENTS