Maggi 16271400, Use And Maintenance Manual, Page: 14 / 62

Pag. 7
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY DA-
MAGE TO PERSONS, ANIMALS OR GOODS DUE TO IMPRO-
PER USE OF THE MACHINE.
9. TRANSPORT
La Foratrice arriva imballata in cassa di legno.
La movimentazione è possibile utilizzando:

muletto

carro ponte

transpallet
I dati relativi al peso sono riportati al par. 6 ed i punti di sollevamento sono visibili nel disegno sottostante.
Quando la macchina viene spostata occorre assicurarsi che l'area intorno sia libera da ostacoli. In caso di
stoccaggio tenere la macchina in luoghi asciutti, al riparo da pioggia, neve o umidità. Durante tutte le fasi di
movimentazione raccomandiamo di usare estrema cautela per evitare il pericolo di danni alle persone, alle
cose ed alla macchina stessa.
10. INSTALLATION
10.1 MACHINE LOCATION
The machine should be placed on a stable surface that can support its weight, any difference in level should
comply with the building regulations. If the machine should be placed on a
raised structure, the slab support system should have the capacity to sustain the weight of the machine.
Place the machine in the most suitable position, based on the operational requirements, so that it can be easily
connected to the mains and pneumatic power supplies.
The installation location should be provided with suitable lighting, so that every part of the machine can be ea-
sily viewed. We also recommend you to place an intake nozzle near the machine, for its periodical cleaning.
10.2 LEVELLING
Make sure that the machine is fully resting on the floor, then align the working table via the adjustable foot ( 1 )
using an Allen wrench, check the levelling with a spirit level. Before proceeding, remove the layer of protective
oil from all unpainted surfaces, using only petroleum or kerosene.
Do not use solvents such as benzene and diesel fuel, that may damage the paint dulling it, or that may oxidise
the machine parts.
1