Magenta MultiView II T4, Installation And User Manual

Page: 8 / 27

Specifications
MultiView™ II T4 Installation and User Guide 3
Chapter 3 Specifications
3.1 General Specifications
Item Description
Cable Required Category 5, 5e, 6 cable. Shielded or unshielded twisted pair. Low-skew.
Compliance CE, FCC Class A, IC Class / Class A, UL listed I.T.E Device, RoHS.
Video Support RGBHV, RGB, Composite, S-Video, and Component Video modes.
Resolution &
Refresh Rate To 1920x1200 @ 70Hz.
Maximum Distance To 2000 ft, receiver dependent.
Interface Signal
Details Video-input:
Standard VGA (HD-15) video connection. The R/G/B signals have a 75-ohm input
impedance. DDC is supported.
Auxiliary Signals (only one type at a time):
L+R summed audio input: 47K ohms input impedance. A source device with 600
ohms maximum output impedance is recommended (analog audio input mode).
Simplex RS-232 input: 4.75K ohms input impedance (simplex RS-232 mode).
S/PDIF input: 75 ohms input impedance (S/PDIF input mode).
Local-output port
drive impedance Video-output:
Standard VGA (HD-15) video connection. Will drive a 75-ohm impedance on the R/G/B
signals. DDC is supported.
Auxiliary Signals (only one type at a time):
L+R summed audio output: Will drive a 600 ohm (or greater) load impedance (analog
audio output mode).
Simplex RS-232 output: Will drive a 600 ohm (or greater) load impedance (simplex
RS-232 mode).
S/PDIF output: Will drive a 75 ohm (typical for S/PDIF) load (S/PDIF output mode).
Audio
Characteristics (A) version: Left+Right summed audio.
Serial
Characteristics (S) version: Simplex-serial, any speed up to 115.2K baud. Transparent to format and
protocol.
Connectors
Standard connectors:
(2) HD15 (VGA) female: Video in/out.
(4) RJ-45: MultiView CAT5 link output.
(2) 4 position phoenix: Auxiliary signal input/output.
(1) Coaxial (5.5mm OD, 2.5mm ID, 11mm L) jack: DC power input.
Temperature
Tolerance Operating: 32 to 104°F (0 to 40°C)
Storage: -4 to +140°F ( -20 to +60°C)
Humidity
Tolerance Up to 80% noncondensing
Enclosure Steel, black powder-coat finish.
Power Input voltage: +5 VDC @ 1 Amps max.
Consumption: 5 watts maximum
Size 1.2"H x 5.6”W x 4.5”D (3.1 x 14.2 x 11.4 cm)
Weight 1.1 lb. (0.5 kg)
MTBF 100,000 hours