Magellan Switch series, User Manual

Page: 3 / 35

Button Press Press and Hold
Up Page back through data screens and up
on menus.
Displays Quick Info screen.
Down Page forward through data screens and
down on menus.
Access Main Menu.
Power Turn backlight on and off. Power on and off.
Back Go back or cancel a selection. Save your current location, advance to
next session (multisport).
Start a new lap (activity mode).
Enter Navigate forward or confirm a selection. Reset your current activity.
Start and stop an activity (activity mode).
Power
Down
Up
Back
Enter
Switch Buttons
Switch has five buttons, all with multiple functions. The chart below describes the different
functions and how they are accessed.
For ease of explanation this manual will refer to the buttons by the names displayed here.
Power
Turning Switch On
1. Press and hold
PowEr
button for 2-3
seconds.
2. The first time you power Switch on
follow the on-screen instructions to
configure the settings and enter your
personal information.
Turning Switch Off
1. Press and hold
PowEr
button for 2-3
seconds.
Turning the Backlight On / Off
Note that the backlight causes a severe
drain on the battery and will greatly shorten
the battery life for each charge. Switch will
automatically turn the backlight off at an
interval set in “Device Settings”. (See
Settings.)
1. Press the
PowEr
button. The backlight
will come on.
2. The backlight will go off automatically
unless the backlight is set to remain on. If
so, press the
PowEr
button to turn the
backlight off.