manualshive.com logo in svg

Magellan MobileMapper CE - Hiking GPS Receiver, Getting Started Manual, Page: 67 / 74

Share
Download
Magellan MobileMapper CE - Hiking GPS Receiver Getting Started Manual Download Page 67

English

61

8. When you see a message saying, “

Operating system updated 

successfully

,” tap 

OK

 on the OS Loader window.

9. Tap 

 in the upper right of the Windows screen to exit 

back to the desktop.

10.Turn off the receiver by tapping 

, then 

Suspend

 and 

then 

OK

 button.

11.After a few seconds, MobileMapper CE’s green LED will 

shut off. You may then press the power button to turn the 
receiver back on.

12.You may verify that the new OS firmware has been suc-

cessfully uploaded by tapping:

 

>Settings>Control Panel

13.Scroll down to the 

Thales System Info

 icon. Double-tap on 

this icon. Confirm that the 

OS F/W Version

 is that which you 

just uploaded.

Updating MobileMapper CE GPS Firm-
ware

1. Go to 

ftp.magellangps.com

 and copy the GPS firmware zip 

file (beginning with an “E” such as “E024.zip”) from the /
Mobile Mapping/MM CE/Firmware folder to any folder on 
your PC.

2. Open the GPS firmware zip file on your PC and extract the 

files to the same directory.

3. Copy the extracted files to MobileMapper CE’s SD card by 

using either a card reader or ActiveSync. To use Active-
Sync, turn on MobileMapper CE and connect it to your PC 
using the USB cable that runs between MobileMapper 
CE’s I/O module and your PC’s USB port. This causes 
ActiveSync to launch on your PC and connect to 
MobileMapper CE as a “Mobile Device.”
Note: Most MobileMapper CE users do NOT set up a part-
nership when connecting to the PC with ActiveSync, but 
you can if you wish.

Summary of Contents for MobileMapper CE - Hiking GPS Receiver











































































Reviews:

No comments