Magellan MobileMapper CE - Hiking GPS Receiver Getting Started Manual Download Page 3

English

authorized Magellan Navigation Service Center will void this 
warranty.

MAGELLAN NAVIGATION SHALL NOT BE LIABLE TO PUR-
CHASER OR ANY OTHER PERSON FOR ANY INCIDENTAL 
OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUD-
ING BUT NOT LIMITED TO LOST PROFITS, DAMAGES RE-
SULTING FROM DELAY OR LOSS OF USE, LOSS OF OR 
DAMAGES ARISING OUT OF BREACH OF THIS WARRANTY 
OR ANY IMPLIED WARRANTY EVEN THOUGH CAUSED BY 
NEGLIGENCE OR OTHER FAULT OFMAGELLAN NAVIGATION 
OR NEGLIGENT USAGE OF THE PRODUCT. IN NO EVENT 
WILL MAGELLAN NAVIGATION BE RESPONSIBLE FOR 
SUCH DAMAGES, EVEN IF MAGELLAN NAVIGATION HAS 
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

This written warranty is the complete, final and exclusive 
agreement between Magellan Navigation and the purchaser 
with respect to the quality of performance of the goods and 
any and all warranties and representations. This warranty sets 
forth all of Magellan Navigation's responsibilities regarding 
this product. This limited warranty is governed by the laws of 
the State of California, without reference to its conflict of law 
provisions or the U.N. Convention on Contracts for the Inter-
national Sale of Goods, and shall benefit Magellan Navigation, 
its successors and assigns.

This warranty gives the purchaser specific rights. The purchas-
er may have other rights which vary from locality to locality (in-
cluding Directive 1999/44/EC in the EC Member States) and 
certain limitations contained in this warranty, including the 
exclusion or limitation of incidental or consequential damages 
may not apply. 

For further information concerning this limited warranty, 
please call or write:

Magellan Navigation, Inc., 960 Overland Court, San Dimas, 
CA 91773, Phone: +1 909-394-5000, Fax: +1 909-394-
7050 or

Magellan Navigation SA - ZAC La Fleuriaye - BP 433 - 44474 
Carquefou Cedex - France  Phone: +33 (0)2 28 09 38 00, 
Fax: +33 (0)2 28 09 39 39.

Magellan Professional Products Limited Warranty (Europe, 
Middle East, Africa)

All Magellan Navigation global positioning system (GPS) re-
ceivers are navigation aids, and are not intended to replace 
other methods of navigation. Purchaser is advised to perform 
careful position charting and use good judgment. READ THE 
USER GUIDE CAREFULLY BEFORE USING THE PRODUCT.

1. MAGELLAN NAVIGATION WARRANTY

Magellan Navigation warrants their GPS receivers and hard-
ware accessories to be free of defects in material and work-
manship and will conform to our published specifications for 
the product for a period of one year from the date of original 
purchase or such longer period as required by law. THIS WAR-
RANTY APPLIES ONLY TO THE ORIGINAL PURCHASER OF 
THIS PRODUCT. 

In the event of a defect, Magellan Navigation will, at its op-
tion, repair or replace the hardware product with no charge to 
the purchaser for parts or labor. The repaired or replaced prod-
uct will be warranted for 90 days from the date of return ship-
ment, or for the balance of the original warranty, whichever is 
longer. Magellan Navigation warrants that software products or 
software included in hardware products will be free from de-
fects in the media for a period of 30 days from the date of 
shipment and will substantially conform to the then-current 
user documentation provided with the software (including up-
dates thereto). Magellan Navigation's sole obligation shall be 
the correction or replacement of the media or the software so 
that it will substantially conform to the then- current user doc-

umentation. Magellan Navigation does not warrant the soft-
ware will meet purchaser's requirements or that its operation 
will be uninterrupted, error-free or virus-free. Purchaser as-
sumes the entire risk of using the software.

2. PURCHASER'S REMEDY

PURCHASER'S EXCLUSIVE REMEDY UNDER THIS WRIT-
TEN WARRANTY OR ANY IMPLIED WARRANTY SHALL BE 
LIMITED TO THE REPAIR OR REPLACEMENT, AT MAGEL-
LAN NAVIGATION'S OPTION, OF ANY DEFECTIVE PART OF 
THE RECEIVER OR ACCESSORIES WHICH ARE COVERED 
BY THIS WARRANTY. REPAIRS UNDER THIS WARRANTY 
SHALL ONLY BE MADE AT AN AUTHORIZED MAGELLAN 
NAVIGATION SERVICE CENTER. ANY REPAIRS BY A SER-
VICE CENTER NOT AUTHORIZED BY MAGELLAN NAVIGA-
TION WILL VOID THIS WARRANTY.

3. PURCHASER'S DUTIES

To obtain service, contact and return the product with a copy 
of the original sales receipt to the dealer from whom you pur-
chased the product.

Magellan Navigation reserves the right to refuse to provide ser-
vice free-of-charge if the sales receipt is not provided or if the 
information contained in it is incomplete or illegible or if the 
serial number is altered or removed. Magellan Navigation will 
not be responsible for any losses or damage to the product in-
curred while the product is in transit or is being shipped for 
repair. Insurance is recommended. Magellan Navigation sug-
gests using a trackable shipping method such as UPS or Fe-
dEx when returning a product for service.

4. LIMITATION OF IMPLIED WARRANTIES

EXCEPT AS SET FORTH IN ITEM 1 ABOVE, ALL OTHER EX-
PRESSED OR IMPLIED WARRANTIES, INCLUDING THOSE 
OF FITNESS FOR ANY PARTICULAR PURPOSE OR MER-
CHANTABILITY, ARE HEREBY DISCLAIMED AND IF APPLI-
CABLE, IMPLIED WARRANTIES UNDER ARTICLE 35 OF THE 
UNITED NATIONS CONVENTION ON CONTRACTS FOR THE 
INTERNATIONAL SALE OF GOODS. 

Some national, state, or local laws do not allow limitations on 
implied warranty or how long an implied warranty lasts, so the 
above limitation may not apply to you.

5. EXCLUSIONS

The following are excluded from the warranty coverage: 

(1) periodic maintenance and repair or replacement of parts 
due to normal wear and tear; 

(2) batteries; 

(3) finishes; 

(4) installations or defects resulting from installation; 

(5) any damage caused by (i) shipping, misuse, abuse, negli-
gence, tampering, or improper use; (ii) disasters such as fire, 
flood, wind, and lightning; (iii) unauthorized attachments or 
modification; 

(6) service performed or attempted by anyone other than an 
authorized Magellan Navigations Service Center; 

(7) any product, components or parts not manufactured by 
Magellan Navigation, 

(8) that the receiver will be free from any claim for infringe-
ment of any patent, trademark, copyright or other proprietary 
right, including trade secrets 

(9) any damage due to accident, resulting from inaccurate sat-
ellite transmissions. Inaccurate transmissions can occur due 
to changes in the position, health or geometry of a satellite or 
modifications to the receiver that may be required due to any 
change in the GPS. (Note: Magellan Navigation GPS receivers 
use GPS or GPS+GLONASS to obtain position, velocity and 

Summary of Contents for MobileMapper CE - Hiking GPS Receiver











































































Reviews: