English
30
SBAS
-
Tap on
, then
Programs>GPS Utilities>DGPS Configuration
.
-
Tap on the
Select Mode
button.
-
In the Select Differential Mode window, enable the
SBAS
option.
-
Tap
OK
to close the window. This takes you back to the
DGPS Configuration window where you can read the
choice you have just made.
-
Tap
OK
again. The window is closed and MobileMapper CE
starts operating instantly in SBAS DGPS mode, which
means it will dedicate two of its reception channels to
SBAS satellites, whenever visible and received, and only
the best one will be involved in the DGPS processing.
-
Start your application.
Beacon
Two different connections to MobileMapper CE are possible
with MobileMapper Beacon: via Bluetooth (preferred) or using
a wire connection (RS232). For more information about Mo-
bileMapper Beacon, please refer to its
Getting Started Guide.
1. If you are using Bluetooth
:
-
Place MobileMapper Beacon between 60 cm (two feet)
and 10 meters (about 30 feet) of the MobileMapper CE.
Do not stand squarely between the two. Bluetooth requires
line of sight, though you may place the Beacon on your
belt.
-
Switch on both MobileMapper Beacon and MobileMapper
CE.
-
On MobileMapper CE, tap on
, then
Settings>Control
Panel
and double-tap
Bluetooth Manager
. The Bluetooth
window appears on the screen after a few seconds.