Magellan eXplorist 310 User Manual Download

Page: 18 / 86

Magellan SporTrak GPS Receiver

The display backlight can be set to one of three levels (low, high or
off ).

Press and

hold for 2

seconds

Display

backlight

illuminates

(low)

Press and

hold for 2

seconds

Display

backlight

illuminates

(high)

Press and

hold for 2

seconds

Display

backlight

turns off

The backlight causes severe drain on the batteries in the

SporTrak. To prevent accidently turning the backlight on and

leaving it on, the SporTrak will turn the backlight off when
there has been no button presses for 4 minutes. Pressing any

button will turn the backlight back on in this instance. You can
change the time delay for the backlight in Setup.

Turning the SporTrak On

The last navigation screen you were viewing will be displayed. If the
last navigation screen view was the Map screen, the last zoom scale
setting will be used.

Turning the SporTrak Off

PWR

Pressing the POWER
button again will turn off
the SporTrack
immediately.

Pressing ESC will cancel
the power down
sequence.

You have 10
seconds to press
ENTER accepting
the warning or the
SporTrak will shut
off.

Summary of Contents for eXplorist 310























































































Search results

Summary of Contents for eXplorist 310

Reviews:

Related manuals for eXplorist 310

Brands by name

Popular brands

Magellan eXplorist 310, User Manual

Search results

Summary of Contents for eXplorist 310

Reviews:

Related manuals for eXplorist 310

Brands by name

Popular brands