OPERATION AND MAINTENANCE MANUAL
SINGLE PHASE MCRII SERIES BATTERY CHARGER
Rev: 1.15
22/08/2018
Doc: MAN-1P_MCRII
Page 21 of 36
Australian Technology
–
Australian Made
64 Bushland Ridge, Bibra Lake, WA 6163 P: +61 8 9434 6621 F: + 61 8 9434 6623
6.3
PROGRAMMABLE SET POINT DESCRIPTIONS
Following is a description of the function each adjustable set point.
Sub Menu 1
Float and Boost Charging Settings
The following set points are used to set the charger output voltage settings and to set
the boost operational parameters.
Float Voltage
Sets the charger output voltage in float mode.
Boost Voltage
Sets the charger output voltage in boost mode.
Boost Timer
Sets the period of one boost cycle.
Battery 1 Boost Activation
Current
Sets the Battery 1 current level at which Auto
Boost is activated.
Battery 2 Boost Activation
Current
Sets the Battery 2 current level at which Auto
Boost is activated.
Boost Activation Delay
Sets the period that the Boost Activation Current
must maintain before the charger switches to auto
boost mode.
Boost Cut-out Ratio
Sets the voltage (as percentage of boost voltage)
at which the boost mode is terminated, if this
voltage is reached within the `Boost Cut-out
Period’
.
Boost Cut-out Period
Sets the period within which the boost is
terminated if the Boost Cut-out Ratio is reached.
