OPERATION AND MAINTENANCE MANUAL
SINGLE PHASE MCRII SERIES BATTERY CHARGER
Rev: 1.15
22/08/2018
Doc: MAN-1P_MCRII
Page 19 of 36
Australian Technology
–
Australian Made
64 Bushland Ridge, Bibra Lake, WA 6163 P: +61 8 9434 6621 F: + 61 8 9434 6623
Pressing the
Mode key will now display the charging rate at which the charger will
operate while in constant current mode. Adjust by using the
Arrow keys (if
necessary).
Pressing the battery test key will initiate constant current mode. The charger will
remain in this mode until the preset time has elapsed. The charger will then return to
its normal state.
Constant current charging can be manually terminated by operating the
Reset key.
5.5.2
Remote Communications (
Optional)
The charger can communicate to an external or remote computer or LAN via an
optional communication card. The communication methods available are:
•
RS-232, DB-9
•
RS-485
•
Ethernet RJ-45
All information relating to the communications port is located in the MCRII Remote
Communications Manual supplied with the MCRII Remote Communications
Package.
Note: for Ethernet RJ-45 communication used right angle connector to avoid the door
