background image

ENG 
 FRA
ESP 
POR

DANGER 
 DANGER 

PELIGRO

PERIGO

FIRE 

 INCENDIE 

FUEGO

INCÊNDIO

EXPLOSION 
 EXPLOSION 
EXPLOSIÓN

EXPLOSÃO

FUMES 

 VAPEURS 
VAPORES
VAPORES

Instruction Manual

EXTREMELY FLAMMABLE GASES USED WITH TORCH FIRE/EXPLOSION HAZARD

This WH0159 Hose Kit is to be used only with propane, or MAP-Pro gases. Use only with hand held cylinders specifically designed for use with 

torches. Never use on heating, lighting or cooking appliances.
Read and follow the instructions and warnings in this manual. Read and follow the torch instructions and warnings before lighting and 

using. Review instructions and warnings periodically to maintain awareness. Do not try to operate before reading instructions without being 

thoroughly familiar with use and potential hazards.
Failure to comply with these instructions or warnings may result in damage to property, serious personal injury or death.

 WARNING

This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth 

defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. 

Wash hands after handling.

• 

Keep torch out of reach of children. Do not permit anyone to use this torch who has not read this manual.

• 

Do not use torch with the fuel cylinder tipped more than 60° from its upright position as this may cause an excessively long flame. This is 

called flare and is very dangerous. The propane cylinder contains gaseous and liquid propane. If the cylinder is moved rapidly, tilted too far 

to the side or upside down, the liquid can enter the valve and cause the flame to flare or go out.

• 

Always point the flame away from your body, other persons and flammable objects. Never attempt to use torch as a cigarette lighter. 

• 

Disconnect torch and hose from cylinder when not in use. 

• 

Do not attempt to modify the torch construction and Never use unapproved accessories or fuels.

• 

Be cautious when using the torch outdoors on sunny or windy days. Bright sun makes it difficult to observe the flame. Wind may 

misdirect the flame toward you or other unintended areas or objects. Wind may further cause sparks to come in contact with unintended 

combustible materials.

• 

Do not drop or otherwise abuse the torch.

• 

Do not use a torch that is leaking, damaged or malfunctioning.

• 

Radiant energy can harm your eyes.  Wear glasses having ANSI 287.12979 shade lens number appropriate to the torch operation as 

indicated; brazing and light cutting (3 or 4), medium cutting and light welding (4 or 5), heavy cutting and medium/heavy welding (5-8).

• 

Never use a torch for stripping lead paint.

• 

Work only in well ventilated areas. The fumes from fluxes, lead-based paint, cadmium plating, brass, zinc and galvanized metal are toxic.

• 

Avoid contact of flux with eyes or skin. 

• 

Always wear protective gloves.

• 

Be aware that the tip of the torch can get extremely hot during use.

• 

Be especially careful around motor vehicles or any gasoline-fired products and beware of any hidden fuel lines and tanks.

• 

Always make certain the torch is placed on a level surface when connected to a fuel cylinder to reduce the risk of accidental tip over.

• 

Never use the torch on or near an aerosol can or any container that contains previously contained chemicals, or flammable materials, liquids or 

gases. Heating these is extremely dangerous, especially after they have been emptied.

• 

Never leave the torch unattended when lit.

• 

This torch consumes oxygen and produces carbon monoxide and must only be used in well ventilated areas.

• 

Always have a fire extinguisher and a bucket of water near the torch and work area.

ENGLISH | ANGLAIS | INGLÉS | INGLÊS

Models: MT48EXT

 DANGER 

 

This is used with a flammable product. Failure to 

comply with these Warnings and Instructions may result 

in an explosion or fire that may cause property damage, 

serious personal injury or death.

Read and comply with the instructions and warnings 

in this manual and familiarize yourself with the torch 

before lighting and using. Review instructions and 

warnings periodically to maintain awareness. Do not try 

to operate before reading instructions.

DO NOT DISCARD THESE WARNINGS AND INSTRUCTIONS | NE PAS JETER CES AVERTISSEMENTS ET CES INSTRUCTIONS

 NO DESECHE ESTAS ADVERTENCIAS E INSTRUCCIONES | NÃO DESCARTE ESTES AVISOS DE ATENÇÃO E INSTRUÇÕES

Summary of Contents for MT48EXT









Reviews: