-17-
2.4
Noise emission specifications
Noise pressure level of the measuring surface:
69.5 dB (A)
Ambient conditions:
< 40 °C (< 104° F)
Noise values were measured acc. to EN 60704-1 on an open air test site at a distance of 1.5 m from the device
surface.
2.5
Scope of supply
Dust extractor S 35 HEPA complete with:
2 folded filter cartridges, cellulose, fibre glass non woven, polyester
1 PE discharge-disposal bag 25/35l (6.60/9.25 US.liq.gal.)
4 m (13.12 ft.) extraction hose, inside-Ø 27 mm (1.06 ft.) antistatic
1 operating manual
2.6
Device description
The dust extractor S 35 HEPA is a device for use as
dry and wet dust extractor.
Wet suction cleaning should be carried out without
filter bag. The filter cartridges are suitable for wet
vacuuming.
2.6.1
Prior to use
-
Pay attention to completeness and transport
damages when unpacking the device.
-
Prior to use, the users should be supplied with
information, instructions and training regarding the
use of the dust extractor and the substances for
which it is to be used, including the safe method to
dispose of the extracted material.
Diligently read these operating instructions before
starting up the dust extractor. It provides important
information on operation, safety, maintenance and
care. Keep the operating instructions in a safe place
and pass them on to the next owner when selling the
device.
2.7
Safety devices
Danger
These devices are required for the
machine's safe operation and may
not be removed or rendered
inoperative.
-
All mobile machine parts driven by electric motors
are covered by stationary, securely fastened
protective enclosures that can only be removed
with the aid of tools.
-
Testing according to EN 60335-1 and EN 60335-2-
69 showed that the safety requirements with
regard to the electrical safety are also met when a
water-air-mixture is vacuumed.
-
The dust extractor is suitable for increased loads in
case of commercial use. According to EN 60335-1
and EN 60335-2-69.
2.8
Use according to intended purpose
Danger
In general, it is not permitted to
vacuum any combustible or
explosive solvents, liquids such as
petrol, oil, alcohol, thinners or
materials with a temperature in
excess of 60 °C (140 °F).
Otherwise there will be danger of
explosion and fire!
The dust extractor can be used for extracting wood
shavings and wood dust from wood processing
devices / machines, the hose connector of which has
a diameter of 35 mm (1.38 in.).
Any other use than described above is not
permissible. The manufacturer cannot be held liable
for any damage arising from such other use.
To use the device as intended, observe the operating,
maintenance and repair conditions prescribed by
Mafell.
This device is also not suitable for operation outdoors
in the rain or in rooms with potentially explosive
atmospheres.
