PSS 3100 SE
01/2022
21
Material
Step
Rotational speed
rpm
Plastic material (styrofoam)
1
2600
Plastic material (styrofoam)
2
3150
Hardwood, softwood, laminated wood, wood-fiber insulation material
3
3700
Hardwood, softwood, laminated wood, coated panel material
4
4200
Hardwood, softwood, laminated wood, coated panel material, fiber cement
board
5
4650
Hardwood, softwood, laminated wood, overlaid panel materials, fiber-cement
panels, soft fiber
6
5200
5.4
Setting the feed speed
The feed speed can be continuously adjusted between 4 and 20 m/min [13.12 - 65.62 ft/min].
Use the following procedure to adjust the feed
speed:
1.
Set the desired feed speed with the rotary
switch 1.
➢
Turning the rotary switch counterclockwise
turns the feed off.
✓
The feed speed is set.
Fig. 11: Setting the feed speed
A diagram attached to the control panel shows suitable “material –
saw blade
–
f
eed speed”
combinations.
Use it for reference when setting the feed speed.
5.5
Switching off
Use the following procedure to switch off the
machine:
1.
Release the rocker switch 3.
➢
Feed and saw blade drive are switched off
immediately.
➢
The saw blade comes to a standstill in less
than 10 seconds.
✓
The machine is switched off.
Fig. 12: Switching the machine off
