PSS 3100 SE
10
01/2022
3.3
Safety instructions
READ ALL INSTRUCTIONS!
Non-observance of the instructions listed below can cause electric shock, fire and/or serious injuries
.
Work area
-
Children and adolescents are not allowed to operate this machine.
-
When using the machine outdoors, the use of an earth leakage circuit breaker is recommended.
-
Replace damaged cables or plugs immediately. To avoid safety hazards, only MAFELL or an authorized
MAFELL service workshop is allowed to replace parts.
-
Prevent sharp kinks of the cable. Do not wrap the cable around the machine, especially when transporting
and storing the machine.
-
Do not use this machine when you are tired, or under the influence of drugs, alcohol or medicaments. Be
aware of what you are doing. Stay alert and use common sense.
-
Keep children and bystanders at a distance while you are operating the machine. Distractions can cause
you to lose control of the machine.
-
Use eye protection, dust mask and hearing protection. Appropriate safety equipment, used
under proper conditions, will reduce the risk of injuries.
Instructions for service and maintenance:
-
Cleaning the machine regularly, especially the adjustment elements and the guiding devices, is an important
safety factor.
-
Ensure that only genuine MAFELL spare parts and accessories are used. Failure to do so will make
warranty claims and the liability of the manufacturer null and void.
-
Prepare a periodic maintenance schedule for your machine. When you clean the machine, be careful
not to disassemble any part of the machine. Reassembling the machine bears the risk that internal
wires are routed incorrectly or pinched, or that return springs of the safety device are mounted
incorrectly.
Certain cleaning agents, such as gasoline, carbon tetrachloride, ammonia, etc. can damage
plastic parts.
-
Some of the dust produced by sawing, sanding, drilling and other building work contains chemicals
known to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
-
Lead from lead-based paints,
-
Crystalline silica from bricks and cement and other masonry products,
-
Arsenic and chromium from chemically treated wood.
Your risk from this hazard varies with the frequency at which you perform this type of work. To reduce your
exposure to these chemicals: Work in a well-ventilated area. Work only with approved safety equipment, such
as dust masks that are specially designed to filter out particles of microscopic size.
