PSS 3100 SE
20
01/2022
5
Operation
5.1
Startup
These operating instructions must be brought to the attention of all persons entrusted with the operation of the
machine, with particular emphasis on the chapter "Safety instructions".
5.2
Switching on
Use the following procedure to switch on the
machine:
1.
Push the rocker switch 3 forwards and hold it.
➢
The saw motor is turned on and the feed
starts 1 second later. The saw motor
accelerates to its operating speed.
✓
The machine is switched on
Fig. 9: Switching the machine on
Push the rocker switch 3 backwards to return the saw unit to its starting position. The return
travel is automatically switched off when the home position is reached.
The saw blade may still rotate during return travel.
5.3
Rotational speed setting
Use the following procedure to select the
rotational speed:
1.
Select the desired level at the setting wheel (9).
➢
At the setting wheel (9), you can adjust the
saw blade speed continuously between
2600 and 5200 rpm.
✓
The rotational speed is set.
Fig. 10: Selecting the rotational speed at the setting wheel
The table below shows the saw blade speed settings that are suitable for your application:
